Tips On Handling And Replacing Projector Lamps
April 30th, 2009 . by Learn For FreeProjectors require the lamp to light up the display that you are trying to project against a wall or object. The lamp can be an expensive part of the machine that you will have to replace after a specified amount of hours to ensure that your projector will continue working.
A project lamp can be bought from the Internet or through your manufacturer. Odds are that the buying process will be more smooth when you do the purchase through retailers, since manufacturers have been known to have high prices and less than satisfactory customer support. This isn’t always the case, so do be sure to investigate your options despite the normal behavior of manufacturers.
Also look into extending the life of your projector lamp, so that you have to buy them less frequently. Some good tips would be to keep the exhaust vent and intake vent free from obstruction. Also allow the fans to do their job, and wait at least 5 minutes to turn your projector off if you have just started it up. Clean the vents as they become dirty from the dust particles in the air.
Projector lamps are sensitive to dirt and grime. The grime that is one your hands is sufficient to limit the lift of your projector lamp. You should handle projector lamps with care, and perhaps use approved gloves to handle the lamp while installing it. Otherwise you may leave residue on the lamp and cause it to overheat, which leads to problems down the road.
You should limit the amount of voltage that is able to reach your projector. Some models will do this automatically, but you should have a surge protector hooked up to the project just in case your specific brand doesn’t have much protection against surges. If you happen to be in an area where a thunderstorm is occurring, it is very possible the extra voltage could damage either your projector lamp or the projector itself without proper intervention.
It is a good practice to have a backup projector lamp. That way if you have an important meeting that requires the usage of the lamp, you will be able to continue the presentation with little interruption. The typical projector lamp will last many hours, so this won’t become a frequent occurrence. Some choose to change out the lamp with a new one, and keep the old one that may have several more hours left on it.
Closing Comments
Caring for a projector lamp is surprisingly easy, so long as you follow certain steps in handling them and maintaining them. In making use of these tips, you will ensure that the expenses put towards lamps are kept at a minimum.
Learn more about projector lamp and projector replacement lamp.